Pengaruh Kontaminasi Garam Terhadap Arus Bocor Isolator Berbahan Polimer Dalam Keadaan Kondisi Kering
| dc.contributor.author | Siregar, Muhammad Rhafiq Azis | |
| dc.date.accessioned | 2026-09-24T21:29:47Z | |
| dc.date.issued | 2026-01-20 | |
| dc.description | Aulia,S.T.,M.Eng.,Ph.D | |
| dc.description.abstract | Penelitian ini bertujuan untuk mengetahui besarnya arus bocor dan resistansi permukaan pada isolator polimer yang terkontaminasi garam, serta menganalisis pengaruhnya terhadap rugi-rugi daya listrik. Metode penelitian yang digunakan adalah eksperimen laboratorium dengan pendekatan step voltage test, di mana isolator diuji pada kondisi bersih, kontaminasi ringan, sedang, dan berat. Tegangan diberikan secara bertahap dari 13 kV hingga 21 kV dengan interval 2 kV, dan arus bocor dicatat menggunakan osiloskop. Hasil penelitian menunjukkan bahwa arus bocor meningkat signifikan seiring bertambahnya tingkat kontaminasi garam. Pada kontaminasi ringan arus bocor naik rata-rata 11% dibandingkan kondisi bersih, pada kontaminasi sedang meningkat hingga 61%, dan pada kontaminasi berat mencapai 177%. Peningkatan arus bocor ini diikuti oleh penurunan resistansi permukaan, di mana kondisi berat menghasilkan resistansi terendah dan paling berisiko menimbulkan kegagalan isolasi seperti flashover. Selain itu, rugi daya juga terbukti meningkat seiring naiknya tegangan dan tingkat kontaminasi, dengan kenaikan drastis pada kondisi kontaminasi berat. Temuan ini membuktikan bahwa kontaminasi garam berpengaruh langsung terhadap menurunnya kualitas isolasi polimer, sehingga pemeliharaan rutin melalui pembersihan permukaan isolator sangat penting untuk menjaga keandalan sistem tenaga listrik. | |
| dc.identifier.uri | https://ailib.my.id/handle/123456789/51056 | |
| dc.language.iso | id | |
| dc.publisher | Universitas Andalas | |
| dc.subject | Isolator Polimer | |
| dc.subject | Arus Bocor | |
| dc.subject | Kontaminasi Gara | |
| dc.subject | Resistansi Permukaan | |
| dc.subject | Rugi-Rugi Daya | |
| dc.subject.classification | TK Electrical engineering. Electronics Nuclear engineering | |
| dc.title | Pengaruh Kontaminasi Garam Terhadap Arus Bocor Isolator Berbahan Polimer Dalam Keadaan Kondisi Kering | |
| dc.type | Thesis | |
| dcterms.dateSubmitted | 2026-01-26 | |
| dcterms.references | John. Kuffel and Peter. Kuffel, High Voltage Engineering Fundamentals, 2nd Edition. Newnes, 2000. R. Raja Prabu, “Outdoor Insulators Introduction to Outdoor Insulators,” 2019. C. Ilomuanya, S. Farokhi, and A. Nekahi, “Performance Evaluation of Outdoor High Voltage Glass Insulators in High Pollution Industrial Areas Using Simulated Acid Rain Contamination,” IEEE Access, vol. 10, pp. 80600–80608, 2022, doi: 10.1109/ACCESS.2022.3193237. A. Celvano Darmadi, Kholistianingsih, and P. Yulianto, “Analisis Tahanan Isolasi Pada Isolator Porselin Dan Polimer Terhadap Polutan Garam Di Gistet 500 kV Adipala Cilacap,” 2022. Eddy Darmawan, Hermawa, and Abdul Syukur, “Analisis Pengaruh Jenis Kontaminan Terhadap Arus Bocor dan THD (Total Harmonic Distortion) Pada Isolator Polimer Resin Epoksi 20 KV Dengan Variasi Tegangan Uji,” vol. 4, 2015. Jumari, J. Sinaga, and S. Zega, “Studi Pengaruh Kontaminan Polusi Udara Pada Isolator Tegangan Menengah 20 kV PadaPT PLN (Persero) Unit Pelaksana Pelayanan Pelanggan (UP3) Medan,” 2020. Sudirman and S. Kurniati, “Pengaruh Kabut Garam Terhadap Kinerja Isolator 20 kV Berbahan Polimer Resin Epoxy,” 2012. Suhartono, “Teknik Tegangan Tinggi,” Yogyakarta:Graha Ilmu, 2011. M. Yu et al., “Integrated Electro-Optic Isolator on Thin Film Lithium Niobate,” 2020. T. Dickson and S. Pavía, “Energy performance, environmental impact and cost of a range of insulation materials,” Renewable and Sustainable Energy Reviews, vol. 140, Apr. 2021, doi: 10.1016/j.rser.2021.110752. P. Systems Engineering Committee of the IEEE Industry Applications Society, “IEEE Std 142-2007 (Revision of IEEE Std 142-1991) IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems,” 2007. Ayman El-Hag, “High Voltage Engineering and Applications,” 2019. [Online]. Available: www.mdpi.com/journal/energies M. Z. Saleem and M. Akbar, “Review of the Performance of High-Voltage Composite Insulators,” Feb. 01, 2022, MDPI. doi: 10.3390/polym14030431. J. Zheng, L. Xie, X. Tan, W. Fang, and X. Qiao, “Failure Analysis and Suggestions of Composite Insulators,” in IOP Conference Series: Earth and Environmental Science, Institute of Physics Publishing, Aug. 2019. doi: 10.1088/1755-1315/300/4/042040. O. E. Gouda et al., “Prediction of Flashover Voltage and Dry Band Location for Polluted Ceramic Insulators Using Dynamic Open-Model,” 2014. [Online]. Available: https://www.researchgate.net/publication/270569256 M. T. Gençoǧlu and M. Cebeci, “The pollution flashover on high voltage insulators,” Electric Power Systems Research, vol. 78, no. 11, pp. 1914–1921, Nov. 2008, doi: 10.1016/j.epsr.2008.03.019. A. A. Thahara, M. C. Fatah, I. G. Mulyana, C. Tio, and M. Fikri, “Optimasi Dielektrika Isolator Polimer Silicone Rubber Menggunakan Bahan Pengisi Limbah Coal Fly Ash,” ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika, vol. 11, no. 4, p. 1075, Oct. 2023, doi: 10.26760/elkomika.v11i4.1075. A. A. Alghamdi, “Computational Optimization of Sandwich Silicone Rubber Composite for Improved Thermal Conductivity and Electrical Insulation,” Polymers (Basel), vol. 16, no. 5, Mar. 2024, doi: 10.3390/polym16050616. SPLN 10-3B, “Tingkat Intensitas Polusi Sehubungan Dengan Pedoman Pemilihan Isolator,” 1993. L. Ruan, G. Han, Z. Zhu, M. Zhang, and W. Gong, “Spatial and Temporal Characteristics of Insulator Contaminations Revealed by Daily Observations of Equivalent Salt Deposit Density,” Sensors (Switzerland), vol. 15, no. 2, pp. 3023–3040, Jan. 2015, doi: 10.3390/s150203023. W. Jiang, C. Tang, and B. Zhou, “Study on the Influencing Factors of Insulator on the Back-Flashover Lightning Withstand Performance of ±800 kV UHVDC Transmission Lines,” Math Probl Eng, vol. 2020, 2020, doi: 10.1155/2020/5021408. C. Fang et al., “Mapping Relation of Leakage Currents of Polluted Insulators and Discharge Arc Area,” Front Energy Res, vol. 9, Nov. 2021, doi: 10.3389/fenrg.2021.777230. A. A. Salem et al., “Influence of Contamination Distribution in Characterizing the Flashover Phenomenon on Outdoor Insulator,” Ain Shams Engineering Journal, vol. 14, no. 12, Dec. 2023, doi: 10.1016/j.asej.2023.102249. C. Zhang, B. Yu, Y. Li, and Q. Yang, “Simplified Calculation Model for Contact Resistance Based on Fractal Rough Surfaces Method,” Applied Sciences (Switzerland), vol. 13, no. 6, Mar. 2023, doi: 10.3390/app13063648. R. S. Widagdo, A. H. Andriawan, S. Tauladan, and A. I. Maulana, “Analysis of Leakage Current Calculation Through Thermal Failure Voltage on 150/20 kV Transformers in GIS Simpang, Surabaya,” vol. 10, no. 2, 2024, doi: 10.35143/elementer. S. Maarif, “Analisis Pengaruh Perubahan Beban Terhadap Partial Discharge dan Arus Bocor pada Kabel Power Incoming 20KV Transformator Daya Gardu Induk Kalibakal Analysis of the Effect of Load Changes on Partial Discharge and Leakage Current in the 20KV Incoming Power Cable to the Power Transformer Substation of Kalibakal,” 2024. [Online]. Available: http://jurnalnasional.ump.ac.id/index.php/JRRE A. Setiawan, I. Ridzki, and P. Surya, “Pengaruh Tegangan Kerja Terhadap Spektrum Frekuensi Gelombang Arus Bocor Pada Isolator Keramik,” Jurnal Eltek, vol. 18, no. 2, p. 59, Oct. 2020, doi: 10.33795/eltek.v18i2.255. A. H. El-Hag, A. N. Jahromi, and M. Sanaye-Pasand, “Prediction of leakage current of non-ceramic insulators in early aging period,” Electric Power Systems Research, vol. 78, no. 10, pp. 1686–1692, Oct. 2008, doi: 10.1016/j.epsr.2008.02.010. O. Marliana Susianti, “Perumusan Variabel Dan Indikator Dalam Penelitian Kuantitatif Kependidikan,” Jurnal Pendidikan Rokania, vol. 9, p. 18, 2024, doi: 10.37728/jpr.v9i1.1066. A. A. Salem et al., “Leakage current characteristics in estimating insulator reliability: experimental investigation and analysis,” Sci Rep, vol. 12, no. 1, Dec. 2022, doi: 10.1038/s41598-022-17792-x. Dr. Molli Wahyuni, “Statistik Deskrptif Untuk Penelitian Olah Data Manual dan SPSS Versi 25,” Kampar, 2020. A. M. S. Utami, A. Syakur, and H. Hermawan, “Analysis of Leakage Current and Insulator Resistivity for Quality Assurance of Medium Voltage Network Polymer Insulators Alumina - SiO2 in Tropical Climate Simulator Room,” Teknik, vol. 42, no. 1, pp. 10–19, May 2021, doi: 10.14710/teknik.v42i1.36152. Arshad, A. Nekahi, S. G. McMeekin, and M. Farzaneh, “Measurement of Surface Resistance of Silicone Rubber Sheets Under Polluted and Dry band conditions,” Electrical Engineering, vol. 100, no. 3, pp. 1729–1738, Sep. 2018, doi: 10.1007/s00202-017-0652-x. N. F. Sopelsa Neto, S. F. Stefenon, L. H. Meyer, R. G. Ovejero, and V. R. Q. Leithardt, “Fault Prediction Based on Leakage Current in Contaminated Insulators Using Enhanced Time Series Forecasting Models,” Aug. 01, 2022, MDPI. doi: 10.3390/s22166121. A. Surya Winarto, “Analisis Pengaruh Isolator Piring Berpolutan di Gresik Terhadap Arus Bocor pada Kondisi Kering dan Basah,” 2019. D. Yudha Pratomo, “Studi Arus Bocor Pada Isolator Suspensi Keramik 20 kV Dalam Kondisi Kering Dan Basah,” 2020. Nofriadi, “Analisa Pengaruh Kontaminan Kalsium Karbonat Terhadap Arus Bocor Arrester Tanpa Sela Berisolasi Polimer,” 2018. | |
| local.eprints.dir | disk0/00/51/82/98 | |
| local.eprints.division | 07B | |
| local.eprints.id | 518298 | |
| local.eprints.type | thesis/2Sarjana | |
| local.eprints.uri | http://scholar.unand.ac.id/518298/ | |
| local.fakultas | Fakultas Teknik | |
| local.identifier.nim | 2110951041 | |
| local.prodi | S1 Teknik Elektro | |
| local.thesis.level | Skripsi |
