Perancangan Peredam Metalik Sebagai Sistem Penyerap Energi Sekaligus Peredam Getaran pada Struktur Bangunan Akibat Beban Dinamik
| dc.contributor.author | efrizal, efrizal | |
| dc.date.accessioned | 2026-09-24T21:36:01Z | |
| dc.date.issued | 2026-01-29 | |
| dc.description | Dr.Eng. Eka Satria: Prof.Dr.Eng. Lovely Son | |
| dc.description.abstract | Dewasa ini, aplikasi struktur ruang telah berkembang dengan sangat cepat. Tidak hanya karena struktur tersebut menawarkan bentuk bangunan yang atraktif, elegan dan indah dari sisi arsitektur, tetapi juga karena mereka mampu menawarkan kekuatan yang baik dengan biaya konstruksi yang ekonomis. Di beberapa negara yang memiliki tingkat intensitas gempa yang besar, seperti Jepang, struktur ini kemudian dapat dialihfungsikan sebagai tempat pengungsian penduduk setelah gempa besar terjadi. Berbagai penelitian telah banyak dilakukan untuk memahami fenomena kegagalan dari struktur ini. Umumnya, kegagalan struktur ini diakibatkan karena pengaruh ketidakstabilan (buckling). Analisis statik dilakukan dengan metode elemen hingga untuk menentukan kekakuan, energi disipasi, serta redaman dari masing-masing peredam, sedangkan analisis dinamik bertujuan mengevaluasi respons struktur terhadap variasi kekakuan dan redaman Pada Tesis ini mengkaji empat jenis peredam getaran yang diterapkan pada sistem bracing, yaitu ini menggunakan C-Shaped Metallic Damper (CSMD) yang mana keempat jenis C shaped metallic damper tipe a(standard), tipe B yg double arah sumbu X, tipe-C yang double arah sumbu Y dan tipe D double arah X dan Z. Hasil analisis statis struktur frame 2D menunjukkan bahwa peredam metalik efektif mereduksi perpindahan akibat beban dinamik. U-Shape Metalic Damper model-c memberikan reduksi terbesar, dimana menurunkan perpindahan sebesar 26.453 mm, model-d sebesar 30.982 mm, dan model-b mencapai 30.999 mm dan model-a sebesar 49.747mm kalau kita bandingkan dengan struktur tanpa peredam model-1 (bracing Chevron) effectivitas reduksi perpindahan sebesar 32.88% .untuk peredam model-c, 21.39% untuk peredam model-d, 21.52% untuk model-b dan -26.27% untuk peredam model-a, sedangkan dengan struktur tanpa peredam model-2 (bracing diagonal) effectivitas reduksi perpindahan sebesar 53.96% .untuk peredam model-c, 46.08% untuk peredam model-d, 46.05% untuk model-b dan 13.38% untuk peredam model-a, | |
| dc.identifier.uri | https://ailib.my.id/handle/123456789/51733 | |
| dc.language.iso | id | |
| dc.publisher | universitas Andalas | |
| dc.subject | Peredam Metalik | |
| dc.subject | C-Shaped Metallic Damper | |
| dc.subject | Steel Ring Damper | |
| dc.subject | dan Saw Type Seismic Energy Dissipater | |
| dc.subject | Beban dinamik | |
| dc.subject.classification | TJ Mechanical engineering and machinery | |
| dc.title | Perancangan Peredam Metalik Sebagai Sistem Penyerap Energi Sekaligus Peredam Getaran pada Struktur Bangunan Akibat Beban Dinamik | |
| dc.type | Thesis | |
| dcterms.dateSubmitted | 2026-01-30 | |
| dcterms.references | 1. Kato, S., Satria, E., Nakazawa, S (2007), “Buckling Analysis of Two-Way Single Layer Lattice Dome with Nodal Eccentricity”, IASS Symposium, Shell and Spatial Structures, Venice, Italy, CD-ROM Paper No. 284T9, December. 2. Kato, S., Satria, E., Nakazawa, S (2007), “Analysis Based Estimation of Buckling Strength of Two-Way Single Layer Lattice Dome with Semi Rigid Connection”, IASS Symposium, Shell and Spatial Structures, Venice, Italy, CD-ROM Paper No. 138T9, December. 3. Kato, S., Yamashita, T., Nakazawa, S., Kim, YB., Fujibayashi, A (2007c); “Analysis based Evaluation for Buckling Loads of Two-Way Elliptic Paraboloidal Single Layer Lattice Domes”, Journal of Constructional Steel Research; Vol. 63(9), September, pp. 1219-1227. 4. Satria, E; Kato, S; Niho, Y (2009); “Form Finding of RC Shells Considering Multiple Design Loads”, International Conference of APCS Nagoya, Japan. 5. Satria, E; Kato, S; Tanjung, J (2010); “Kaji Keefektifan Penerapan Teknik Pencarian Bentuk dalam Perancangan Struktur latticed Shell”; Seminar Nasional SNTTM IX, Palembang. 6. Niho, Y., Kato, S., Satria, E (2010).; “A Study on a Procedure to Design Light-Weight Latticed Shells with High Strength”, International Conference of IASS, Shanghai-China. 7. Satria, E., Kato, S., Nakazawa, S., Kakuda, D. (2008), “Buckling Behavior of Two-Way Single Layer Lattice Dome with Nodal Eccentricity”, Journal of Structural Engineering, Architectural Institute of Japan (AIJ), March, Vol.54B, pp.679-692. 8. Satria, E., Kato, S., Nakazawa, S., Kakuda, D. (2008), “Study on Dynamic Behavior of a New Type of Two-Way Single Layer Lattice Dome with Nodal Eccentricity”, Steel and Composite Structures, An International Journal, December, Vol.8 No.6, pp.511-530 9. Satria, E., Kato, S., Nakazawa, S., Kakuda, D (2008).; “Effectiveness of Applying T-Joint Struts on Two-Way Single Layer Lattice Dome Structures”, Annual Meeting of AIJ (Architectural Institute of Japan), Hiroshima, Japan, August, pp.889-890. 10. Kato, S.; Higuchi, N.; Satria, E.; Nakazawa, S (2010).; “Elasto-Plastic Buckling Strength of A Two-Way Dome Constructed by Orthogonal Arches in Different Surfaces Stiffened by Diagonal Struts – Feasibility study of a newly proposed two-way single layer dome”, Journal Structural Engineering (AIJ), Vol 56B, March, pp.499-506. 11. Satria, E.; Kato, S; Nakazawa, S (2012),“Feasibility of Tubular T-Joints as a Damage Controller for Roof Structures under Loading”, International Seminar of ICCIFAM, Padang-West Sumatera, Indonesia, 22-23 November 2012 12. Satria, E; Kato, S; Niho, Y (2015); “Perbaikan Metode Perancangan Struktur Atap pada Daerah Rawan Gempa, Jurnal Teknik Mesin Indonesia, Vol.(2) Oktober 2015, BKSTM Indonesia. 13. Kato, S., Kim, Y.B., Nakazawa, S., Ohya, T (2006), “Simulation of the Cyclic Behavior of J-Shaped Steel Hysteresis Devices and Study on the Efficiency for Reducing Earthquake Responses of Space Structures”, Journal of Constructional Steel Research, October, Vol. 61(10), pp. 1457-1473. 14. Satria, E., Son, L., Haris, S., Saputri, R (2018),” Static and Dynamic Analysis of Steel U-Damper for Space Structures”, International Journal on Advanced Science, Engineering and Information Technology, Vol. 8(1), pp. 212-218 15. Satria, E., Son, L., Bur, M., Akbar MD, Haris, S (2019),” Numerical Analysis of U-Shaped Hysterisis Steel Damper with Energy Absorber for Seismic Areas”, IOP Conf. Series: Material Science and Engineering, 602.1.012078 16. Satria, E., Son, L., Bur, M., Akbar MD (2021),” Finite Element Analysis to Determine Stiffness, Strength, and Energy Dissipation of U-Shape Steel Damper under Quasi Static Loading”, International Journal of Automotive and Mechanical Engineering (IJAME), Vol. 18(3), pp.9042-9050. 17. O. C. Zienkiewicz, R. L. Taylor, and J. Z. Zhu, “The Finite Element Method: Its Basis and Fundamentals”, 2013 | |
| local.eprints.dir | disk0/00/52/03/25 | |
| local.eprints.division | S2TM2024 | |
| local.eprints.id | 520325 | |
| local.eprints.type | thesis/3Magister | |
| local.eprints.uri | http://scholar.unand.ac.id/520325/ | |
| local.fakultas | Fakultas Teknik | |
| local.identifier.nim | 2120912003 | |
| local.prodi | S2 Teknik Mesin | |
| local.thesis.level | Tesis |
